Hardwood Flooring Installation & Refinishing in Brooklyn, NY
Illyrian Group Corp installs engineered and solid hardwood flooring and refinishes original floors in Brooklyn brownstones, condos, and multi-family homes.
- Engineered & Solid Hardwood
- Refinishing & Repair
- Custom Stain Matching
- Free On-Site Estimate
Brooklyn's housing stock has some of the best original hardwood in the city, and also some of the most water damage and wear from a century of use. Illyrian Group Corp installs new hardwood flooring and refinishes original floors, matching the right approach to what's actually under your feet. Prewar buildings in neighborhoods like Park Slope and Fort Greene often still have their original quarter-sawn oak hiding under years of carpet or worn-out finish, and in a lot of cases that floor is worth saving rather than tearing out.
We treat hardwood flooring as its own trade, not a line item bolted onto a bigger renovation, which means dedicated crews, direct material sourcing, and a scope that accounts for your specific building type from the start. Because Illyrian Group Corp is a full general contractor, we can also fold a flooring project into a larger kitchen or bathroom remodel without you having to coordinate a separate flooring sub, or handle it as a clean standalone job when that's all you need.
A hardwood project rarely happens in isolation. If you're also updating a kitchen or bathroom during the same renovation, we sequence the flooring work around those trades so new floors don't get damaged by later demolition or plumbing work. When it's a standalone flooring job, we work around your schedule directly, including evenings or weekends for occupied units where that's the only time that works.
Signs Your Brooklyn Floors Need Attention
- Boards that creak, cup, or feel soft underfoot when you walk across them
- Deep scratches, gouges, or a finish worn through to bare wood in high-traffic areas
- Gaps between boards that have visibly widened over time
- Water staining or discoloration near windows, radiators, or old plumbing lines
- A finish that looks dull or yellowed no matter how often it's cleaned
- Carpet or old vinyl covering original hardwood you haven't seen in years
Installation vs. Refinishing
New Installation
Best when there's no existing hardwood, or the existing floor is damaged beyond refinishing.
- - Subfloor inspection and prep
- - Engineered or solid hardwood install
- - Transitions and threshold work
- - Stain and finish application
Refinishing
Best when original hardwood is in good structural condition but worn, scratched, or outdated in color.
- - Sanding down to bare wood
- - Board repair or replacement as needed
- - Custom stain color matching
- - Multiple protective finish coats
Hardwood Material Tiers
Standard
Red oak or ash in a standard or select grade, 2 1/4 to 3 inch strip width, finished with a standard water-based polyurethane. A durable, budget-conscious choice for rental units, straightforward replacements, or rooms that see heavy daily use.
Mid-range
White oak or hickory in a select grade, 4 to 6 inch wide plank, custom stain color-matched to adjoining rooms, finished with an upgraded oil-modified polyurethane for richer color depth and better wear resistance.
High-end
Wide-plank white oak or walnut in a rift-and-quartered or premium grade, hand-scraped or wire-brushed texture, European hardwax oil or UV-cured factory finish, with herringbone or chevron layout options that read as a real architectural feature.
Hardwood Flooring Cost in Brooklyn
General NYC market ranges to help you budget, not a quote for your specific project. Your exact price depends on scope, condition, and finish level, confirmed in a free written, itemized estimate after an on-site walkthrough.
What moves your price up or down
- Wood species and grade
- Subfloor condition and leveling needed
- Total square footage
- Stain and finish complexity
- Removal and disposal of existing flooring
- Building sound-transmission requirements for hard-surface floors
How a Brooklyn Hardwood Flooring Project Runs
Walkthrough
We inspect the existing floor or subfloor, take measurements, and check for board damage or moisture issues.
Material selection
You choose species, plank width, and finish; we check it against your building's underlayment rules if one applies.
Prep work
We level the subfloor and remove old flooring or damaged boards as needed before install day.
Install or sand
New flooring is installed to manufacturer spec, or existing floors are sanded down to bare wood.
Finish & walkthrough
Stain and protective coats go on, then we walk the finished floor with you before closing out the job.
What's Included in a Hardwood Flooring Job
Included in scope
- Subfloor inspection and prep
- Material delivery and installation or sanding
- Transition strips and thresholds
- Stain and finish application
- Dust containment during sanding
- Final walkthrough and touch-ups
Priced separately
- Underlayment upgrades beyond your building's minimum
- Furniture moving (available on request)
- Subfloor structural repair beyond leveling
- Board replacement for termite or major water damage
What Complicates a Flooring Job in an Older Brooklyn Building
- Uneven subfloors: many prewar buildings have subfloors that have settled unevenly over a century, requiring self-leveling compound before new flooring can lie flat.
- Radiant heat systems: some previously renovated units have radiant heat installed under the existing floor, which limits which wood species and moisture content are safe to install over it.
- Board acclimation: hardwood needs several days to acclimate to your apartment's humidity before installation, which affects scheduling in an occupied unit.
- Alteration agreements: co-op and condo boards often require a signed alteration agreement and certificate of insurance before flooring work can start, adding lead time to the schedule.
- Delivery and hallway protection: material delivery is often restricted to certain hours, and common hallways need floor protection during move-in, both of which we coordinate with building management in advance.
Why Property Owners Choose Illyrian Group Corp
One Point of Contact
One project lead from the first walkthrough to the final punch list, not a rotating cast of subs.
Written, Itemized Quotes
Every estimate is written and itemized before work starts. No verbal-only pricing, no surprise change orders.
Permits Handled for You
We manage the Department of Buildings permit process for scope that requires it, so your project stays on schedule.
1-Year Workmanship Warranty
Every hardwood installation and refinishing job we complete in Brooklyn is backed by a 1-year workmanship warranty. If a board lifts, a seam opens, or the finish fails under normal use within that year, we come back and fix it at no cost to you.
How Much Does Hardwood Flooring Cost in Brooklyn?
Most Brooklyn hardwood projects run $8 to $18 per square foot installed, depending on whether you choose engineered or solid wood, and $4 to $8 per square foot to refinish existing floors. Your final number depends on square footage, subfloor condition, and finish choice, confirmed in a free written estimate after we've seen the space.
Not sure if your floor needs replacing or refinishing?
We'll assess it honestly during a free walkthrough.
Hardwood Flooring Across Park Slope, Fort Greene & Beyond
We install and refinish hardwood floors throughout Brooklyn, including Park Slope (11215), Brooklyn Heights (11201), Carroll Gardens, and Fort Greene (11205), with regular work near Prospect Park in prewar buildings that still have original quarter-sawn oak under old carpet or finish.
Many Brooklyn co-op and condo buildings require a minimum sound-transmission rating, sometimes called an STC or IIC rating, or a cork underlayment for hard-surface flooring installed above another unit. We confirm your building's specific requirement before ordering materials so the installation passes approval the first time.
If your building management or board requires a formal alteration agreement or a copy of our insurance before work starts, we handle that paperwork as part of scheduling, so it doesn't become a delay once your materials are on-site.
Frequently Asked Questions - Hardwood Flooring
Engineered or solid hardwood for a Brooklyn apartment?
Engineered hardwood handles humidity swings better and can be installed over concrete slabs common in newer Brooklyn condo buildings, while solid hardwood is often the better match for older brownstones where the existing floor is being replaced with the same material. We'll recommend the right one for your specific subfloor during the walkthrough.
Can you refinish original hardwood floors in a Brooklyn brownstone?
In most cases, yes, if the existing floor has enough wear layer left for sanding. We assess the condition of the boards during the walkthrough. If the floor has been sanded too many times already or has water damage, replacement may be the better option, and we'll tell you honestly which applies.
Does my Brooklyn building require special underlayment for hardwood floors?
Many co-op and condo buildings set a minimum sound-transmission rating for hard-surface flooring installed above another unit, which usually means adding a cork or acoustic underlayment beneath the new floor. We check your building's specific rule during the walkthrough and include the right underlayment in your quote so the install passes approval.
How long does hardwood floor installation take?
A single room typically takes 1-3 days for installation plus finishing time. A full apartment can run 1-2 weeks depending on square footage and whether existing flooring needs to be removed first. Refinishing existing floors usually takes 3-5 days including dry time between coats.
Why Brooklyn Homeowners Choose Illyrian for Hardwood Flooring
Most flooring companies either install new material or refinish old floors, rarely both at the same skill level. We do both under one roof, which means the recommendation you get is based on what's actually best for your floor, not on which service the crew happens to sell. Combined with direct material sourcing, a 1-year workmanship warranty, and the ability to fold flooring into a larger renovation without adding a subcontractor, it's a more accountable way to get hardwood work done in a Brooklyn building than hiring a standalone flooring specialist with no full renovation company behind the work.
Explore Our Main Renovation Services
Ready to Update Your Floors?
Get a free, written estimate from Illyrian Group Corp.
Call (347) 461-4856